Ultra Stick Hangar 9 Spécifications télécharger pdf (Page 13)

Outrunner Motor Installation

Required Parts

• Fuselage

• Brushless motor

• Brushless speed control

• 4-40 x 1/4" socket head screw (4)

• Prop adapter

• Propeller

Required Tools and Adhesives

• Hex wrench: 3/32"

Skip to page 16 for setup of an inrunner motor

with gearbox.

Note: This section covers the installation of a

brushless outrunner motor with attachment to

the outside. You do have the option of installing

your outrunner inside the fuselage as well. If

using our recommended E-flite™ Outrunner, it

may be necessary to reverse the direction of

your shaft to install the motor inside the fuse.

See photo below for reference.

Option 1: Motor Installation Inside Fuselage

 1. Install the outrunner motor using the hardware

provided with the motor. The screws go through

the front of the firewall and into the motor.

13

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 35 36

Commentaires sur ces manuels

Pas de commentaire